Author Topic: Casting "half-shell" hollow pieces from Epoxy Resin  (Read 5493 times)

RJBowman

  • Zeppelin Captain
  • *****
  • Posts: 2082
Casting "half-shell" hollow pieces from Epoxy Resin
« on: July 02, 2017, 04:12:34 am »
I was investigating techniques for a possible project to make cast-resin action figures. I had this technique in mind, but didn't know if it would work, and this video confirms that it does. Video is a little long, because the process is t little elaborate. I'm sure that other people on this forum could find uses for this method. The video was produced by a resin manufacturer; I have no connection to them.

Mold Making Tutorial: How to Make a Silicone Squish Mold for Casting a Plastic Model Car Body

J. Wilhelm

  • ╬ Admiral und Luftschiffengel ╬
  • Board Moderator
  • Immortal
  • **
  • Posts: 8117
  • Sentisne fortunatum punkus? Veni. Diem meum comple
    • NASA Dude
Re: Casting "half-shell" hollow pieces from Epoxy Resin
« Reply #1 on: July 02, 2017, 05:10:41 am »
I was investigating techniques for a possible project to make cast-resin action figures. I had this technique in mind, but didn't know if it would work, and this video confirms that it does. Video is a little long, because the process is t little elaborate. I'm sure that other people on this forum could find uses for this method. The video was produced by a resin manufacturer; I have no connection to them.

Mold Making Tutorial: How to Make a Silicone Squish Mold for Casting a Plastic Model Car Body

That's an awesome video.