The Steampunk Forum at Brass Goggles
November 21, 2017, 02:55:07 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Brassgoggles.co.uk - The Lighter Side Of Steampunk, follow @brasstech for forum technical problems & updates.
 
   Home   Blog Help Rules Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Today on Hack A Day: Learn Watch Repair  (Read 1235 times)
von Corax
Squire of the Lambda Calculus
Moderator
Immortal
*
Canada Canada

Prof. Darwin Prætorius von Corax


« on: July 09, 2014, 07:43:28 pm »

It was actually on yesterday, but Hack A Day has an article on how and where to learn to repair mechanical watches.

One particularly interesting resource mentioned is the document TM 9-1575, the United States War Department Technical Manual on Ordnance Maintenance: Wrist Watches, Pocket Watches, Stop Watches, and Clocks, dated 6 April 1945.
Logged

By the power of caffeine do I set my mind in motion
By the Beans of Life do my thoughts acquire speed
My hands acquire a shaking
The shaking becomes a warning
By the power of caffeine do I set my mind in motion
The Leverkusen Institute of Paleocybernetics is 5838 km from Reading
HAC
Steam Theologian
Zeppelin Overlord
*******
Canada Canada


HAC_N800
« Reply #1 on: July 09, 2014, 08:33:00 pm »

One word of advice.. get good tools.. (and learn how to properly use and care for them..) and its not exactly as easy as that site makes it sound, once you get beyond a clean and oil.. I have watched (pun!) my watchmaker fabricate from scratch a staff for a vintage watch, using a small jewelers lathe.. asked him how hard that was to do, he said it took him about 10 years as an apprentice in London to get to that stage, and even now, it requires full attention and a lot of measuring..  

One bit of advice from experience.. Ultrasonic cleaners can damage really old delicate parts - when in doubt the old styel cleaning machine is a better choice. At any rate when using an ultrasonic - always use a suspended parts basket - never lay parts on the bottom of the cleaner...
« Last Edit: July 09, 2014, 09:40:53 pm by HAC » Logged

You never know what lonesome is , 'til you get to herdin' cows.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.042 seconds with 18 queries.