The Steampunk Forum at Brass Goggles
March 20, 2018, 04:44:37 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: - The Lighter Side Of Steampunk, follow @brasstech for forum technical problems & updates.
   Home   Blog Help Rules Login Register  
Pages: [1]   Go Down
Author Topic: wood strips for modellers etc  (Read 839 times)
Kevin C Cooper Esq
Zeppelin Captain
United Kingdom United Kingdom

Asymetry is the bane of my life

« on: November 21, 2013, 05:03:00 pm »

Having recently partaken in a fibrous plaster adventure to produce cornice for my daughters dining room. I ended up with a budle of off cuts of lath. I think it was larch wood, closed grained and virtually knot free. The ones we used were 22mm wide x 3mm thick. Most excellent for some recent work on a dolls house. The supplier I used has them in 10, 13 and 22mm widths, and 3 or 5mm thickness from 1.5 metres to 3 metres long. Of course if you can find a fibrous plaster workshop in your vicinity you may be able to beg some offcuts, or at least pay very little for them.

Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.02 seconds with 16 queries.