The Steampunk Forum at Brass Goggles
October 18, 2017, 01:24:49 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Support BrassGoggles! Donate once or $3/mo.
 See details here.
 
   Home   Blog Help Rules Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Request: guide to cleaning techniques and tools  (Read 1078 times)
Zer0
Officer
***
United States United States


« on: February 11, 2009, 01:32:03 am »

I recently bought a pocket watch and its running rather slow. I suspect it needs a good cleaning and some lubrication. I look to you fine gentlemen for advice on the tools and techniques of cleaning a mechanical pocket watch.

Preferably, since I am just starting out, a list of parts that are most likely to be causing the extra friction that I can mark them for cleaning and oiling. Will I need to take the entire watch apart?

Thank you sirs.
Logged

To see your world in a grain of sand, and a heaven in a wild flower. To hold infinity in the palm of your hand, An eternity in an hour.  -William Blake.
Zwack
Zeppelin Admiral
******
United States United States

And introducing the wonderful Irish (Mrs Z).


« Reply #1 on: February 11, 2009, 03:44:30 am »

http://www.thewatchguy.com/pages/repair.html

Might help in giving you a rough guide to what to do...  But I seem to remember Harold stating that it missed out some important bits.

Z.
Logged

"At least those oddballs are interesting" - My Wife.
I'm British but living in America.  This might explain my spelling.
HAC
Steam Theologian
Zeppelin Overlord
*******
Canada Canada


HAC_N800
« Reply #2 on: February 11, 2009, 04:02:27 am »

For a beginner, that's a good starter site..  As a beginner, what you really want to learn is a simple clean and lube, and not more complex repairs.. I'd start out by learning proper tool handling techniques.

A good (but not free) online course is the TZ watch school.. 

http://www.timezonewatchschool.com/WatchSchool/

It also has some good examples of tools needed.. At a minimum, I would suggest a good screwdriver set, two tweezers (#2 and#5), a hand blower, loupe or other magnifier, Rodico, pithwood and peg wood, watch papers, case wrench, perhaps hand setting and removal tools (although you can use tweezers for that), movement holder and covers..
After that, you could add in stem cutting pliers and case holder/cushion, springbar tools and a pin vise, and after that, complete your base set the tools for oiling, namely four hand oilers; Moebius 9010, 8141, and D5 oils, PML grease; and a four-cup metal oil stand,a s well as cleaning solutions and baskets.

That's the basic set of stuff that any watchmaker will have. There are other tools you can add, as you get more experienced.

As for books, I really like the DeCarle books...
http://www.ofrei.com/page216.html


Cheers
Harold
Logged

You never know what lonesome is , 'til you get to herdin' cows.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.06 seconds with 17 queries.